To set up your **HP DeskJet 2755e** printer, follow these key steps:
1. **Unpack and prepare the printer**: Remove all packaging materials including protective tapes inside the cartridge area and on the scanner bed. Plug the power cable into the printer and a power outlet, then press the power button to turn it on[3].
2. **Install ink cartridges**: Open the front cover and inner cartridge cover, remove the cartridges from packaging, and pull off any protective tape on the cartridges before installing them into their slots[3].
3. **Load paper**: Place plain paper in the paper tray before proceeding with setup[3].
4. **Connect to Wi-Fi wirelessly**:
– Make sure your Wi-Fi network is active, stable, and the printer is within range.
– Use the printer’s control panel or the HP Smart app on your computer or mobile device to find your printer and connect it to your wireless network.
– If connecting manually, ensure your Wi-Fi password is correct, and your router allows needed ports (9100, 515) for HP Smart connectivity[1][4].
5. **Use the Embedded Web Server (EWS) for Web Services setup**:
– From your computer, access the printer’s EWS via its IP address.
– Click on the ‘Web Services’ tab.
– Click ‘Setup’ then ‘Continue’ to follow the instructions for enabling Web Services, which includes updating firmware if needed.
– The printer will print an information page once this is complete[1].
6. **Install Printer Software**:
– Download and install the latest printer drivers and HP Smart software from the HP website to complete installation and enable full functionality[2].
Following these steps will ensure your HP DeskJet 2755e is fully set up for printing, scanning, and wireless connectivity across your devices[1][2][3][4].