You can connect your HP printer to your computer using either a **wired USB connection** or a **wireless network connection**.
**For a wired USB connection:**
– Use the USB cable that came with your printer to connect the printer directly to your computer.
– Windows will usually detect the new device automatically and begin installing drivers. If a prompt appears, follow the on-screen instructions.
– If not detected automatically, go to **Settings > Devices > Printers & Scanners**, select **Add a printer or scanner**, find your printer in the list, and follow the setup prompts[1][3].
**For a wireless (Wi-Fi) connection:**
– Ensure your printer and computer are connected to the *same* Wi-Fi network.
– On the printer, use the control panel to navigate to **Settings > Network Setup > WiFi Setup Wizard**, select your network, and enter the Wi-Fi password[4].
– Install the **HP Smart app** on your computer (available via Microsoft Store or HP’s website). Use the app to find and add your printer over the network[2][3].
– In Windows, you can also go to **Settings > Devices > Printers & Scanners > Add a printer or scanner** to detect the wireless printer[1][3].
– Confirm the printer’s Wi-Fi icon shows it is connected on the printer display[4].
Additional tips:
– Ensure your computer has the latest printer drivers from HP if installation does not happen automatically.
– For best results, place the printer within good Wi-Fi signal range.
– If difficulties arise, reinstall the printer drivers and software from HP’s official website or use the HP Smart app for guided setup[3][4].
This process applies to most HP printer models and both Windows and Mac computers. For specific models or OS versions, refer to the HP support site or your printer’s manual.