how to set up hp deskjet 2742e to wifi

To set up your **HP DeskJet 2742e printer to WiFi**, follow these steps:

1. **Power on the printer** and ensure it’s ready (not in an error state)[1][5].

2. **Connect via the HP Smart app** (recommended for ease):
– Download and open the *HP Smart* app on your smartphone or computer.
– Start the setup process in the app and select Wi-Fi setup.
– Enable Bluetooth on your device if prompted.
– The app will scan for nearby printers, select your DeskJet 2742e from the list.
– Enter your WiFi network password when asked and confirm[2].

3. **Activate the connection on the printer**:
– After entering WiFi credentials in the app, press the blinking “i” button on the printer (located just below the WiFi button) to continue pairing and connect the printer to WiFi[2].
– Wait for confirmation on the app and printer display that the connection was successful.

4. Alternatively, **connect via printer control panel**:
– Use the printer’s control panel to navigate to *Wireless Settings* > *Network Setup* or *Wireless Setup*[1].
– Select your WiFi network from the list of available networks.
– Enter your WiFi password using the on-screen keyboard.
– Confirm and wait for the printer to connect.

5. **Update drivers on your computer** if needed, to ensure proper communication over the new WiFi network[1].

**Additional notes**:

– The printer’s WiFi button will blink blue when not connected and become solid once connected[5].
– There is also an option to use Wi-Fi Direct for direct device-to-printer connection without a network, but that is typically less common for regular network printing[3].
– Print a network configuration or WiFi password page if needed by pressing the WiFi and info buttons simultaneously for two seconds[3].

This setup allows wireless printing from smartphones, tablets, and computers on the same WiFi network as the printer[4].