To connect the **HP Envy Pro 6458 printer to Wi-Fi**, follow these steps:
1. **Prepare the printer for setup**:
– On the printer, press and hold the wireless button (usually on the back or control panel) for about 3 seconds until the light changes to purple or starts blinking, indicating it’s in setup mode[4].
2. **Download and open the HP Smart app** on your smartphone or tablet (available on iOS App Store or Google Play Store)[1][4].
3. **Connect your mobile device to the desired Wi-Fi network** (the one you want the printer to join). Ensure this network is stable, and your phone is connected to it[4].
4. **In the HP Smart app**:
– Tap **Set up a new printer** or the plus (+) icon.
– The app will detect the printer (usually as HP Envy 6400 series)[1].
– Select your printer and confirm the Wi-Fi network you want your printer to join.
– Enter the Wi-Fi password if prompted and follow on-screen instructions[1][4].
5. **Complete the setup**:
– When the app confirms the printer is connected to the network, the setup is complete. You can start printing wirelessly from your device[1].
### Additional Tips (if you encounter issues):
– Restart your router and printer before trying again[3].
– Reset the printer’s network settings via the control panel (navigate to Network or Wireless settings and select “Restore Network Settings”)[3].
– Make sure no electronic interference (like microwaves or cordless phones) is near the printer during setup[3].
– Check for and install any firmware updates via HP’s website[3].
This method uses the HP Smart app, which is the recommended and easiest way to connect your HP Envy Pro 6458 to Wi-Fi.
References: [1][3][4]