how to add wifi to hp printer

To add Wi-Fi to an HP printer, you typically need to connect the printer to your wireless network either via the printer’s control panel or using HP software. The most common methods include:

1. **Using the HP Smart App:**
– Ensure the printer is on and has paper.
– Connect your phone or computer to the Wi-Fi network.
– Download and open the HP Smart app.
– Add your printer by either automatic detection or manual selection.
– Go to printer settings > Network Setup.
– Select your Wi-Fi network and enter the password.
– Complete the connection process.
This method works well for HP DeskJet and similar models[1].

2. **Using the Printer’s Built-in Wireless Setup Wizard (if available):**
– On the printer’s control panel or touchscreen, go to Setup or Network settings.
– Select the Wireless Setup Wizard.
– Choose your Wi-Fi network from the list and enter the password.
– Wait for connection confirmation.
This is recommended if your printer has a display screen[2][3].

3. **WPS (Wi-Fi Protected Setup) Method (if your router supports WPS):**
– Press the WPS button on your router.
– Within 2 minutes, press the WPS button on the printer.
– Wait for the connection to complete and for a solid Wi-Fi indicator light.
This method requires no password entry and is quick and secure[2].

4. **Using USB Setup for Printers Without Display:**
– Connect the printer to a computer via USB.
– Use the HP Smart app or printer software to add the printer.
– Follow the wizard to configure wireless settings.
– Remove the USB cable once setup completes[2].

If your printer model supports it, these methods will enable wireless capability using your existing Wi-Fi network. Always ensure your printer and computer or mobile device are on the same network during setup.

For precise steps for your specific HP printer model, refer to the printer’s manual or the HP Support site[4][5].