how do i connect my hp envy printer to wifi

To connect your HP Envy printer to WiFi, you can either use the printer’s control panel or the HP Smart app.

Using the printer’s control panel:
1. Turn on the printer and check if the Wi-Fi indicator light is flashing.
2. On the printer, press the Settings button.
3. Select Network.
4. Choose Wireless Setup Wizard.
5. Select your Wi-Fi network name and enter the password.
6. Follow on-screen instructions to complete the connection[1].

Using the HP Smart app (recommended for ease):
1. Download and install the HP Smart app on your smartphone or computer.
2. Open the app and sign in or create an HP account.
3. Tap the plus (+) icon to add a printer.
4. Select your HP Envy printer from the list.
5. Follow the app’s instructions to connect the printer to your Wi-Fi network[1][3].

For specific models like the HP Envy 6000e, you can also press and hold the wireless button on the back of the printer for about five seconds until the status light turns purple, which means the printer is in Wi-Fi setup mode. Then use the HP Smart app to complete the connection within two hours[2][3].

If you’ve changed networks or want to connect to a new WiFi, you can reset the printer’s network settings via the Wireless or Network menu on the control panel, then reconnect it using the HP Smart app by removing the old printer entry and adding it again with the new network info[4].

Make sure your mobile device or computer running the HP Smart app is connected to the same Wi-Fi network you want the printer to use.

Following these steps should successfully connect your HP Envy printer to WiFi. For detailed visuals and further troubleshooting, you can refer to the official HP support website or instructional videos like those dated 2023 and 2021 for step-by-step guidance[1][3][4].