## How to Add an HP Wireless Printer
**Preparation**
– **Place your printer close to your Wi-Fi router** for the best signal during setup[3].
– **Make sure your printer is powered on** and fully assembled, with ink cartridges loaded and any test page printed successfully.
## Connection Methods
### 1. Using the Printer’s Built-in Setup Wizard
– **Access the printer’s control panel** and navigate to **Setup**, **Network**, or **Wireless Settings**.
– Select **Wireless Setup Wizard**.
– Choose your Wi-Fi network from the list and enter the password when prompted.
– Wait for the printer to confirm a successful connection[1][3].
### 2. WPS (WiFi Protected Setup) Method
– **Press the WPS button on your router**.
– **Within 2 minutes, press the WPS button on your printer**.
– Wait for the printer to establish a connection (look for a solid Wi-Fi light).
– This method is quick and doesn’t require entering a network password, but both your router and printer must support WPS[1].
### 3. HP Smart App Setup
– **Download and install the HP Smart app** on your computer or mobile device.
– **Open the app**, tap **Add Printer**, and follow the on-screen instructions.
– The app will guide you through connecting the printer to your Wi-Fi network, even if your printer does not have a display[1][2].
– If your printer is not found, put it into Wi-Fi Setup mode (often by pressing and holding the Wi-Fi button until lights flash).
– Once connected, you can print directly from the app[2].
### 4. USB Cable Setup
– **Connect your printer to your computer with a USB cable**.
– **Install HP software** from the official website.
– **Follow the software prompts** to set up wireless printing.
– Once wireless setup is complete, disconnect the USB cable[1].
## Adding the Printer to Your Computer (Windows)
– **Open Settings** > **Bluetooth & devices** > **Printers & scanners**[4].
– **Select Add device** and wait for your printer to appear, or **Add manually** if it is not found automatically.
– **Follow any on-screen instructions** to complete the driver installation and printer setup[4].
## Troubleshooting Tips
– **Ensure your printer and computer are on the same Wi-Fi network**.
– **Restart your printer, router, and computer** if connection issues persist.
– **Update printer drivers and firmware** for optimal performance.
– **Check HP’s support resources** for model-specific help with wireless connectivity[1].
## Summary Table
| Method | When to Use | Key Steps |
|————————–|———————————————-|—————————————————————————|
| Built-in Setup Wizard | Printer has a display | Use touchscreen to select network and enter password[1][3] |
| WPS Button | Router & printer support WPS | Press WPS on both devices[1] |
| HP Smart App | Any HP printer, mobile or desktop setup | Use app to guide connection, supports printers without displays[1][2] |
| USB Cable | Initial setup or troubleshooting | USB connection first, then configure wireless[1] |
| Windows Settings | Add printer to a Windows PC | Add via Printers & scanners in Settings[4] |
Follow these steps to securely and efficiently add your HP wireless printer to your network and devices. If you encounter persistent issues, consult HP’s official support pages or customer service for further assistance[1][3].