To connect your HP printer to Wi-Fi, you can follow these common methods:
**1. Using Wi-Fi Protected Setup (WPS) Push Button:**
– Make sure your HP printer supports WPS and your router has a WPS button.
– On the printer, press and hold the Wireless button until the wireless light blinks; if no button, access the menu to find Wi-Fi Protected Setup and select Push Button.
– Within two minutes, press and hold the WPS button on your router until its light blinks.
– The printer will establish connection; the wireless light will stop blinking or display a confirmation message.
– After connection, install HP printer software on your computer or mobile device to start printing[1][2].
**2. Using the HP Smart App:**
– Turn on your printer; ensure the Wi-Fi light flashes blue. If not, press and hold the Wi-Fi and Cancel buttons until power light blinks.
– Open the HP Smart App on your Android or iOS device and select Add/New Printer.
– Choose your Wi-Fi network and enter the password.
– When prompted, press the Information button on your printer.
– The Wi-Fi light will stop blinking, indicating successful connection[3].
**3. Manual Wireless Setup via Printer Control Panel:**
– Place the printer within range of your Wi-Fi network and power it on.
– Access the printer’s Wireless or Network Settings menu.
– Select your Wi-Fi network from the list, enter the password, and wait for connection confirmation.
– Print a test page to verify connectivity[2].
Following these steps, you can wirelessly connect your HP printer and enjoy printing from your computer, smartphone, or tablet without cables. If your printer model or setup preferences differ, consult your specific printer’s manual or HP Support online for guidance.