how do i connect my printer to the wi fi

To connect your printer to Wi-Fi, you typically have two main options depending on your printer model:

1. **Using the Wireless Setup Wizard on the Printer (if it has a screen and controls):**
– Turn on your printer and make sure it’s within range of your Wi-Fi network.
– On the printer’s control panel, go to **Setup** or **Network Settings** and select **Wireless Setup Wizard** (or similar).
– Choose your Wi-Fi network name (SSID) from the list.
– Enter your Wi-Fi password when prompted.
– The printer will try to connect and show a confirmation once connected[3][4].

2. **Using WPS (Wi-Fi Protected Setup) if your router and printer support it:**
– Locate the **WPS button** on your router (often labeled WPS or has a symbol).
– Press the WPS button on your router.
– Within 2 minutes, press and hold the **Wi-Fi** or **WPS button** on your printer for about 3–5 seconds until a wireless light blinks.
– The printer should automatically connect to the network without needing to enter a password[1][2][4][5].

Additional tips:
– If your printer has no screen, WPS is often the easiest method.
– For HP printers, pressing the wireless button for 3 seconds then the router’s WPS button will connect them[1][5].
– For other brands like Brother or Epson, the process is similar, often accessible via their setup menus or control panels[2][4].
– If WPS is not supported or not working, you can also install the printer software on your computer or mobile device, which usually walks you through connecting the printer to Wi-Fi[3][4].

Make sure your printer and device are on the same Wi-Fi network after setup to print wirelessly. If connection issues persist, consult your printer’s manual or manufacturer support for troubleshooting based on your model.