To connect your **HP Envy 6000 printer to Wi-Fi**, follow these key steps:

1. **Press and hold the Wireless button on the back of the printer for about 5 seconds** until the status light changes to purple. This puts the printer into Wi-Fi setup mode (Auto Wireless Connect mode)[1][3][5].

2. **Open the HP Smart app** on your computer, smartphone, or tablet. If you don’t have it, download and install the HP Smart app from the official site or your device’s app store[1][3][5].

3. In the HP Smart app, **add a new printer**; the app should detect your HP Envy 6000 in setup mode (glowing purple light)[1][2].

4. **Select your Wi-Fi network** from the list and enter your Wi-Fi password when prompted in the app[1][2][3].

5. Complete the setup by following the onscreen instructions in the HP Smart app. After a few moments, the printer should connect to your wireless network, confirmed by a steady blue Wi-Fi indicator on the printer[2].

Additional notes:
– Ensure your laptop, phone, or tablet is connected to the same Wi-Fi network you want the printer to use[1][3][5].
– Turn on Bluetooth on your mobile device if using iOS or Android to speed up setup via the HP Smart app[5].
– If issues arise, restoring the printer’s network settings by pressing the Wireless button for 5 seconds can reset and enable retrying the connection process[5].

This method applies to the HP Envy 6000 and 6000e series printers, with slight variations depending on model and app version but generally consistent as described[1][3][5].