To connect your **HP Envy 6065e printer to WiFi**, you can use the printer’s control panel or the HP Smart app by following these steps:
1. **Turn on** your printer and make sure it is ready.
2. On the printer’s touchscreen, go to **Wireless** or **Network settings**.
3. Select **Wireless Setup Wizard** or **Wi-Fi Setup Wizard**. The printer will scan for available WiFi networks.
4. Choose your home or office WiFi network from the list.
5. Enter your WiFi password when prompted and confirm.
6. Once connected, a confirmation message will appear on the printer’s display.
7. Optionally, install the **HP Smart app** on your computer or mobile device, connect it to the same WiFi network, and add your printer for wireless printing and scanning.
Alternatively, if your router supports **WPS (WiFi Protected Setup)**:
– Press the **WPS button** on your router.
– Within two minutes, press and hold the **Wireless button** on the printer for about 3 seconds until the printer’s light flashes purple, indicating it is ready to connect.
– The printer will automatically connect to the network.
After the connection is established, you can print a network configuration page from the printer’s **Wireless** or **Network settings** menu to verify connectivity.
For further convenience, you can also reinstall the printer software on your computer via **Windows Settings > Devices > Printers & scanners** or **System Preferences > Printers & Scanners** on macOS and add the printer on the same network[2][4][5].
Video guides are also available that demonstrate holding the wireless button to initiate WiFi setup and using the HP Smart app to complete the process[1][3].