To connect your HP printer to the internet (wireless network), you can follow these commonly used methods:

**1. Connecting via Wi-Fi Protected Setup (WPS) Button:**

– Ensure your HP printer supports WPS push button mode and your router has a WPS button.
– Press and hold the Wireless button on the printer until the wireless light blinks (or navigate to Network/Wireless settings > Wi-Fi Protected Setup > Push Button > Start).
– Within two minutes, press and hold the WPS button on your router until its WPS light blinks.
– The printer will connect automatically; the wireless light will stop blinking or a confirmation message will appear[1].

This method does not require entering your Wi-Fi name or password manually.

**2. Connecting via Printer Control Panel:**

– Turn on the printer and access its wireless setup menu.
– Select your Wi-Fi network from the list of available networks.
– Enter your Wi-Fi password when prompted.
– Wait for the printer to establish the wireless connection.
– Print a test page to confirm connection[2][4].

**3. Using the HP Smart App (for smartphones/tablets):**

– Make sure the printer is on and the Wi-Fi light is blinking blue. If not, press and hold the Wi-Fi and Cancel buttons until the power light blinks.
– Open the HP Smart App on your Android or iOS device.
– Select Add Printer or New Printer.
– Choose your Wi-Fi network and enter the password.
– When prompted, press and release the Information button on the printer.
– The Wi-Fi light will stop blinking, indicating the printer is connected[3].

**Additional Tips:**

– Place the printer within range of your Wi-Fi network for a stable connection.
– If your printer does not have a WPS button, use the wireless setup wizard from the control panel.
– After connection, install HP printer software on your computer or mobile device for seamless printing[2].

Using these steps, you can easily connect your HP printer to your wireless internet network and begin printing wirelessly from various devices.