To reconnect your HP Envy 6000 printer to WiFi, **press and hold the Wireless button on the back of the printer for about 3–5 seconds until the status light turns purple**, indicating the printer is in setup mode. Then, open the HP Smart app on your computer or mobile device, add the printer, and follow the on-screen instructions to select your WiFi network and enter the password. Once the printer shows a stable blue light, it is connected to the WiFi network and ready to use[1][2][5].
Key steps summarized:
– Press and hold the Wireless button on the printer until the purple light appears (3–5 seconds)[1][2][5].
– Open the HP Smart app and tap the plus (+) button to add a new printer[1][2].
– Select your HP Envy 6000 series printer in the app’s list, confirm your WiFi network, and enter the password[1][2].
– Wait for the printer’s blue light to become steady, indicating a successful WiFi connection[1][2].
– Press the flashing information button on the printer’s control panel to complete setup if prompted[1].
Additional tips:
– Ensure the printer is within WiFi range and the router is working properly[4].
– Restart your printer and router if connection issues persist[4].
– Update printer firmware if available from HP’s support site to improve connectivity[4].
Following these steps should enable you to reconnect your HP Envy 6000 to your wireless network smoothly.