To set up the **HP DeskJet 2800e printer**, follow these key steps:
1. **Unboxing and Initial Setup**
Remove all packaging materials and documentation, then insert the ink cartridges and load paper into the tray. Connect the power cord and turn on the printer[1].
2. **Download and Install the HP Smart App**
Download the HP Smart app on your smartphone or computer. This app simplifies the setup process and allows you to control the printer settings and printing tasks[1][3].
3. **Connect to Wi-Fi**
– **Wireless Setup Mode:**
Switch on the printer and enter setup mode by pressing and holding the *Cancel* button and the *Wireless* button simultaneously for about 3 seconds until the power and wireless lights flash. This means the printer is ready for Wi-Fi setup[3].
– **Wi-Fi Connection via HP Smart App:**
Open the HP Smart app, ensure your phone or computer is connected to your Wi-Fi network, then add the printer by selecting your HP DeskJet 2800e series model in the app. Enter your Wi-Fi network password carefully (it is case-sensitive; use the same password as your mobile or home Wi-Fi)[2][3].
– **Alternate Connection Method:**
Some setups use Bluetooth pairing initially to find the printer, then transition to Wi-Fi by selecting the right network and inputting the password[2].
4. **Finalize Setup**
After the printer connects to the Wi-Fi, you may be prompted to press and release the *Information* button on the printer to confirm the connection[2]. Follow on-screen instructions to complete the setup.
5. **Print a Test Page and Scan (Optional)**
Once setup is complete, you can print a test page and try scanning documents via the app to ensure everything works properly[3].
These steps cover unboxing, hardware setup, software installation, and wireless connectivity for the HP DeskJet 2800e series printers[1][2][3][4]. For detailed, step-by-step visuals, there are tutorial videos available showing the entire process.