To set up the **HP DeskJet 2752 printer Wi-Fi connection**, follow these key steps:
1. **Ensure your Wi-Fi network is active and working properly.** The printer requires a stable 2.4 GHz Wi-Fi connection, as it does not support the 5 GHz band. If you have a dual-band router, make sure the 2.4 GHz band has a distinct SSID and is enabled for the printer to connect[3].
2. **Put the printer in Wi-Fi setup mode:**
– On the printer control panel, press and hold the Wireless button for about 5 seconds until the light starts blinking. This puts the printer into a mode ready to connect to your wireless network[2][3].
3. **Use the HP Smart app to connect:**
– Download and open the **HP Smart app** on your computer or smartphone. The app guides you through connecting the printer to your Wi-Fi network step-by-step.
– Follow the prompts to select your Wi-Fi network and enter your Wi-Fi password[1][5].
4. **Confirm Wi-Fi connection:**
– After setup, the blue wireless light on the printer should be steady, indicating successful connection to the network.
– Print a wireless network test or information page via the printer settings to verify[1][3].
### Additional Tips:
– Make sure the device you want to print from is connected to the same Wi-Fi network as your printer[2].
– If your printer cannot connect, separate the SSIDs of your 2.4 GHz and 5 GHz networks on your router, since a shared SSID can cause connectivity issues[2][3].
– The printer supports Wi-Fi 802.11b/g/n standards on the 2.4 GHz band only[4].
This procedure generally takes just a few minutes, and once completed you can enjoy wireless printing and scanning from your HP DeskJet 2752[1][5].