To connect your **HP ENVY Pro 6458** printer to Wi-Fi, follow these steps:
1. **Turn on Wi-Fi on the printer:**
– On the printer control panel, ensure the Wi-Fi is enabled.
– Navigate to the wireless or network settings menu.
2. **Reconnect to your Wi-Fi network:**
– From the printer control panel, select your home Wi-Fi network.
– Enter the correct Wi-Fi password when prompted.
– Follow any additional on-screen instructions for connection setup[1].
3. **Use the HP Smart app for easier setup (optional but recommended):**
– Install the HP Smart app on your Windows PC, Mac, or mobile device.
– Make sure your device is connected to the same Wi-Fi network you want your printer to join.
– Open HP Smart, add the printer by searching on the network or using the plus button.
– Follow the app prompts to complete the Wi-Fi setup[3][4].
4. **Troubleshooting if connection fails:**
– Restart your Wi-Fi router and printer.
– Reset the printer’s network settings to default from the settings menu and then reconnect.
– Ensure no interference from other electronic devices (e.g., microwaves, cordless phones).
– Temporarily disable VPN, firewall, or antivirus software that might block communication[1][3].
– Check for any firmware updates for your printer via the HP website and install them if available[1].
5. **Confirm the connection:**
– Once setup completes, confirm the printer shows as online in the HP Smart app or on the printer panel.
– Print a test page to verify successful Wi-Fi connection[3].
Following these instructions carefully will connect your HP ENVY Pro 6458 printer to your Wi-Fi network effectively[1][3][4].