To set up Wi-Fi on the **HP Envy Pro 6458**, follow these steps:
1. **Prepare the Printer**
– Turn on your printer and ensure it is ready.
– Reset the network settings on the printer by going to the control panel: select the Wireless or Network icon, then navigate to **Settings > Restore Network Settings** or **Restore Network Defaults**, and confirm the reset[1][3].
2. **Use the HP Smart App**
– Download and install the **HP Smart app** on your smartphone or Windows PC (available in the App Store or Microsoft Store)[3][4].
– Open the HP Smart app and make sure your phone or PC is connected to the Wi-Fi network you want the printer to use.
– In the app, either add the printer if it shows offline by removing and adding again, or click the **+ (plus)** icon to add a new printer.
– Follow the on-screen instructions to connect the printer to the Wi-Fi network[3][4].
3. **Enter Wi-Fi Setup Mode on Printer (if needed)**
– If the printer doesn’t connect automatically, put it in Wi-Fi setup mode by pressing and holding the wireless button on the back of the printer for about three seconds until the light changes color (purple or blinking)[4].
4. **Complete Setup on Printer Screen**
– Use the printer control panel to select your Wi-Fi network and enter the correct password carefully[1][2].
5. **Additional Tips**
– Restart your router before setup if you encounter issues[1].
– Avoid Wi-Fi interference from devices like microwaves or cordless phones near the printer[1].
– Check and update the printer firmware through HP support if needed[1].
Following this procedure should connect your HP Envy Pro 6458 to Wi-Fi successfully, allowing wireless printing[1][3][4].