To connect your Brother MFC-L2707DW printer to a Wi-Fi network, follow these steps:
## Step 1: Gather Network Information
– **Network Name (SSID):** Find the name of your wireless network on your router or in the documentation provided with your router.
– **Network Key (Password):** Locate the password for your network on the router or in its documentation. Brother cannot provide this information, so you may need to contact your internet service provider or router manufacturer if you cannot find it[3].
## Step 2: Enable Wireless on the Printer
1. **Turn on the Printer:** Ensure the printer is powered on.
2. **Access Menu:**
– Press the **Menu** button.
– Use the **Up or Down arrow** keys to select **Network**.
– Press **OK**.
3. **Select WLAN:**
– Use the **Up or Down arrow** keys to select **WLAN**.
– Press **OK**.
4. **Enable WLAN:**
– Select **WLAN Enable** and choose **On**[4].
## Step 3: Set Up Wireless Connection
1. **Start Setup Wizard:**
– Under the **WLAN** menu, select **Setup Wizard**.
– Press **OK**.
2. **Select Network:**
– The printer will search for available networks and display them on the screen.
– Use the **Up or Down arrow** keys to select your network.
– Press **OK**.
3. **Enter Network Key:**
– If prompted, enter your network password and press **OK**[1][4].
## Step 4: Confirm Connection
– **Check for Connection:** The printer should now be connected to your Wi-Fi network. You might see a confirmation message or a wireless signal indicator light up on the printer.
## Optional: Download and Install Software
– Visit the Brother support website to download and install the necessary printer software for your computer[1][4].
## Alternative Method: WPS Connection
If your printer and router support WPS (Wi-Fi Protected Setup), you can connect using the **Push Button Method** or the **PIN Method**. Refer to your printer’s documentation for specific instructions on using WPS[4].