To set up your **HP OfficeJet 5255 All-in-One printer**, follow these main steps for wireless setup and initial preparation:
1. **Gather Supplies**
Make sure you have:
– HP OfficeJet 5255 printer, powered on
– Power cable connected
– Compatible ink cartridges installed
– Paper loaded in the tray
– Your Wi-Fi network name (SSID) and password
– A computer or mobile device with internet access for installation and driver setup[1]
2. **Prepare the Printer for Wireless Setup**
Place the printer near your Wi-Fi router for a stable connection, then power it on and load paper[1].
3. **Using the Printer Control Panel for Wireless Setup**
– On the printer’s touchscreen panel, navigate to **Wireless** or **Settings**.
– Select **Wireless Setup Wizard** or **Network Setup**.
– If available, choose Wi-Fi Protected Setup (WPS) or Wireless Setup Wizard.
– Select your Wi-Fi network (SSID) from the list.
– Enter your Wi-Fi password (WEP/WPA passphrase or security key).
– Confirm and allow the printer to connect to the network.
– Optionally, print a wireless test report from the printer to confirm connection success[1][2].
4. **Install Printer Drivers and Software**
On your computer, download the latest drivers and software from the official HP website or use the installation disc if provided. Run the setup file as Administrator, follow the on-screen prompts carefully to complete installation and to connect the printer fully to your system[3][4].
5. **Finishing Up**
After the printer is connected to your network and software installed, test the printer by printing a test page or document from your computer or mobile device to confirm everything works properly[4].
For a visual step-by-step guide, you can also watch tutorial videos such as the detailed Wi-Fi connection walkthrough available on YouTube that shows the exact steps on the printer’s touchscreen[2].
By following these instructions, your HP OfficeJet 5255 will be setup and ready for wireless printing from multiple devices seamlessly.