xerox workcentre 6605 wireless setup

To set up wireless on the Xerox WorkCentre 6605, you can either use the printer’s control panel Wi-Fi Setup Wizard or use the Xerox Easy Wireless Setup utility from a computer.

**Using the printer control panel Wi-Fi Setup Wizard:**

1. Press the *Machine Status* button on the printer’s control panel.
2. Touch the *Tools* tab.
3. Navigate to *Admin Setting > Network > Wi-Fi*.
4. Select *Wi-Fi Setup Wizard*.
5. Choose your wireless network from the list. If it’s not shown, you can enter the network details manually.
6. Enter the network passphrase and confirm.
7. To verify connection, print a Configuration Report to see the assigned IP address[1][4].

**To manually enter the wireless network:**

– Follow steps 1-3 above.
– Select *Manual SSID Setup*.
– Enter the network SSID, encryption type, and passphrase[1].

**Using Xerox Easy Wireless Setup Utility (for Windows PC and Mac 10.15+):**

1. Download and install the Xerox print driver and utilities package from the Xerox support site for WorkCentre 6605.
2. Run *setup.exe* and select *Easy Wireless Setup* during installation.
3. Connect the printer to the computer via USB cable temporarily when prompted.
4. Follow the on-screen instructions to select the wireless network and enter the password.
5. Once complete, disconnect the USB cable and use the printer wirelessly[2].

Note: The printer cannot use wired Ethernet and wireless simultaneously. Unplug Ethernet if switched to wireless[2].

These are the two primary methods to connect the Xerox WorkCentre 6605 to a wireless network, either directly through the printer panel or via a PC utility. For detailed steps, refer to the user manual and Xerox support articles[1][2][3][4].